System Technical Configuration
|
Item |
Specification |
|
System Type |
Diesel Generator + ATS Integrated System |
|
Power Range |
1000kW – 4000kW |
|
Transfer Mode |
Automatic / Manual / Test Mode |
|
Switching Time |
5–10 seconds (system dependent) |
|
Rated Voltage |
400V / 415V / 480V / 6.3kV |
|
Frequency |
50Hz / 60Hz |
|
Control System |
PLC-based ATS controller |
|
Engine Type |
Turbocharged diesel engine |
|
Alternator Type |
Brushless industrial alternator |
|
Voltage Regulation |
AVR automatic regulation |
|
Starting System |
24V DC electric start |
|
Protection Grade |
IP23 / IP44 |
|
Communication |
Modbus / RS485 / Ethernet |
Product Overview
Automatic Transfer Power System Diesel Generator is an integrated emergency power solution combining diesel generator set and automatic transfer switching (ATS) system for seamless transition between grid power and backup power supply.
Automatic Transfer System Performance
Seamless Power Switching: Automatically transfers load from utility power to generator within seconds during grid failure.
Intelligent Load Detection: Continuously monitors grid status and triggers start/stop operations based on real-time power conditions.
Stable Transfer Control Logic: Ensures controlled switching process to avoid voltage fluctuation and equipment impact.
Fast Start Engine Coordination: Optimized start sequence improves response time during emergency activation.
Safe Load Reconnection: Gradual load pickup design reduces inrush impact during power restoration.
Dual Power Source Management: Automatically manages grid power and generator output without manual intervention.
Control & Monitoring System
Real-Time Power Monitoring
Tracks voltage, frequency, load status, and grid condition continuously.
Event Recording System
Logs all switching events, start/stop actions, and fault alarms.
Remote Operation Interface
Supports remote monitoring and control via industrial communication protocols.
Automatic Test Cycle
Scheduled self-test operation ensures system readiness without manual intervention.
Selected Custom Options
ATS System Upgrade
Heavy-duty industrial ATS cabinet
Redundant switching contactors
Monitoring Expansion
Remote cloud monitoring module
SCADA integration interface
Environmental Adaptation
Outdoor weatherproof enclosure
Low-temperature start assistance system
Factory Testing & Validation
Automatic Transfer Simulation
Simulated grid failure tests verify switching response and stability.
01
Load Transition Testing
Checks performance during sudden load pickup and restoration switching.
02
System Integration Test
Verifies coordination between generator, ATS cabinet, and control system.
03
Electrical Safety Verification
Tests interlock protection, grounding, and fault response behavior.
04
FAQ
Q: What is the main function of ATS in this system?
A: ATS automatically switches power supply between utility grid and diesel generator during power failure or restoration.
Q: Is manual operation available?
A: Yes. The system supports automatic, manual, and test operation modes.
Q: How fast is the power transfer?
A: Transfer time typically ranges from 5–10 seconds depending on system configuration.
Q: Can it protect equipment during switching?
A: Yes. The system uses controlled switching logic to reduce voltage and current impact on equipment.
Q: Can it be integrated into building management systems?
A: Yes. It supports SCADA and BMS integration through standard industrial communication protocols.
Hot Tags: automatic transfer power system diesel generator, China automatic transfer power system diesel generator manufacturers, suppliers, factory
